Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
- Maintenance service
   The routine maintenance schedule
   Checks of levels of liquids
   Check of a condition and pressure in tyres
   Check of brushes of a screen wiper
   Check of a condition and degree of gymnastics of the storage battery
   Check of lamps and safety locks
   Replacement of impellent oil and the filter
   Removal of water from the fuel filter of the diesel engine
   Check колодок forward brake mechanisms and disks
   Check of final system
   Suspension bracket and steering check
   Check of protective covers of a power shaft and SHRUS
   Check of hoses on presence of leaks of a liquid
   Check of an inhaling of bolts of wheels
   Replacement of the dustproof filter
   Check of level of a liquid of automatic transmission
   Check of system of release
   Check of a central air of air
   Check of system of an onboard electric equipment
   Check of a sheeting of the bottom
   Check of pressure of pressurisation (diesel models with турбокомпрессором)
   Check of seat belts
   Check and replacement auxiliary drive a belt
   Replacement of spark plugs and check of system of ignition
   Replacement of a filtering element of the air filter
   Replacement of the fuel filter of the diesel engine
   Check of system of heating and ventilation
   Greasing of hinges and locks
   Check of spare fuses
   Check of a thickness колодок back brake mechanisms
   Check of level of oil of a manual box of a gear change
   Replacement of a liquid of automatic transmission
   Replacement of the fuel filter
   Replacement of a brake liquid
   Road test
   Valve clearing recycling the fulfilled gases (engines K7M and F7R)
   Replacement of a cooling liquid
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes



Check of levels of liquids

Procedures of check of level the liquids made through each 400 km of run or weekly are more low described. The description of other checks of levels of a liquid can be found further in the Sections devoted to specific procedures of service. Irrespective of check intervals under the schedule do not suppose, that the liquid followed under the car, such leaks specify in malfunction which should be eliminated immediately.

Liquids are the integral component of systems of greasing, cooling, brake and systems of washing of a windscreen. In view of the gradual expense and-or pollution of liquids in the course of normal operation of the car, it is necessary to replace them periodically. Familiarise with Section “Lubricants and liquids” in Specifications before to start to доливанию liquids in any of the listed components.

At any check of level of a liquid the car should stand on an equal surface.

IMPELLENT OIL

Before the work beginning

Be convinced that your car costs out of the blue.
Check up oil level before engine start, or at least in 5 minutes after engine deenergizing.

Correct oil

Modern engines make the big demands to oil. Therefore it is very important to use the necessary grade of oil.

Precautions

If you have to add often oil, it is necessary to check up, whether there are leaks. Place a white paper piece under the car and check up in the morning, whether there are oil stains. If no leaks are present, probably the engine burns oil.
Always support level between the top and bottom labels on probeе. If level too low, can occur serious damage of the engine. If impellent oil the epiploon can fail is poured.

 CHECK

1. Щуп level measurements is on the right back part of the engine on petrol engines E7J and К7М and on a forward part of the engine on 2.0 l petrol and diesel engines. Take probe level measurements (address to an accompanying illustration).

2. Using pure rags or a paper towel, wipe all oil with probeа. Insert pure probe into a tube as far as possible, then get it again (address to an accompanying illustration).

3. Oil level on the end probeа, should be between the top label "MOVE" and the bottom label (“MIN”) (address to an accompanying illustration).

4. Oil is filled in through a jellied mouth. Turn away a cover and finish to norm oil level; for passage avoidance use a funnel. Add oil slowly, do not pour (address to an accompanying illustration).

COOLING LIQUID

Do not try to uncover pressure of a broad tank if the engine has not cooled down yet, it is possible to be scalded. Do not leave opened capacity with a cooling liquid as it is poisonous.

Precautions

Regular addition of a cooling liquid it should not be required. If frequent refuelling is required, possibly there is a leak. Check up a radiator, all hoses and socket surfaces, correct as required.
It is important, that antifreeze in cooling system has been filled in all year long, and not just for the winter. Do not supplement with pure water as concentration of antifreeze will be reduced.

 CHECK

1. Level of a cooling liquid changes with engine temperature. On the cold engine level of a cooling liquid should be between labels “MIN” and "MOVE" (address to an accompanying illustration).

2. If it is necessary to add, wait, while the engine will cool down. Slowly turn away a cover of a broad tank, letting out pressure in cooling system, remove it (address to an accompanying illustration).

3. Add a water and antifreeze mix in a broad tank while level of a cooling liquid does not become between labels. Establish a cover and reliably tighten it (address to an accompanying illustration).

LIQUID OF THE HYDRAULIC BOOSTER OF THE STEERING

Before the work beginning

Park the car out of the blue.
Establish forward wheels directly.
Liquid level check on the idle engine.

The requirement for frequent refuelling specifies in leak which should be immediately eliminated.

 CHECK

1. The tank of hydrosystem of the amplifier of a steering is on the right side of a radiator. Liquid level check on the switched off engine. Labels "MOVE" and “MIN” are put sideways the tank (address to an accompanying illustration).

2. Liquid level should be between labels “MIN” and "MOVE". If refuelling is necessary, wipe area round a cover that the dirt has not got to the tank (address to an accompanying illustration).

3. Add level of a liquid to a label “MAX”, using the type of a liquid specified in Specifications (do not pour), then establish and tighten a cover of a jellied mouth (address to an accompanying illustration).

BRAKE LIQUID

The brake liquid can damage your eyes and the painted surfaces, therefore observe extreme care at work.

Do not use a liquid which stood opened during some time as it absorbs a moisture from air that leads to loss of efficiency of braking. If frequent refuelling is required, it speaks about leak presence in system which immediately is required to be revealed and eliminated.

If leak is supposed, the car cannot be maintained, yet will not check up brake system. Never risk, when brakes are faulty


 CHECK

1. Labels “MAX” and “MIN” are designated sideways the tank which is in a back left corner of an impellent compartment. Liquid level should be between two labels (address to an accompanying illustration).

2. If refuelling is necessary, wipe area round a cover of a jellied mouth pure rags and disconnect wires from the gauge of level of a liquid. Examine the tank — if a liquid dirty, it is necessary to replace it (address to the Head Brake system) (address to an accompanying illustration).

3. Accurately add a liquid, being careful not to spill it. Use only the specified liquid, mixing of liquids of different types to cause system damage. After refuelling establish a cover, wipe the spilt liquid (address to an accompanying illustration).

4. At check of level of a liquid it is possible to check up work of a control lamp of low level of a liquid. Include ignition and ask, that the assistant has pressed the test button on the top part of a cover of the tank of brake hydrosystem. When the button is pressed, the control lamp should light up — if it not so, the switch, conducting or a lamp are faulty (address to an accompanying illustration).

WASHER LIQUID

Liquid additives стеклоомывателя not only contain cleaning additives, they also prevent freezing of system of a washer. Do not add simple water as the liquid стеклоомывателя will too be dissolved and will freeze in cold weather. Do not use antifreeze in washer system, it can damage colouring.

 CHECK

1. The tank of a liquid of a washer of wind glass / a back door/washer of headlights is on the right side of an impellent compartment. If refuelling is necessary, open a cover (address to an accompanying illustration).

2. Add a liquid стеклоомывателя, diluted in the quantities recommended on a bottle (address to an accompanying illustration).