Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   The general description of search of malfunctions in electric equipment system
   The general description of fuses and the relay
   Removal and installation of switches
   Replacement of lamps (external lighting devices)
   Replacement of lamps (lanterns of illumination of salon)
   Removal and installation of blocks of external lanterns
   The general description of adjustment of a direction of an optical axis of light of headlights
   Removal and installation of the instrument panel
   Removal and installation of components of the instrument panel
   Removal and installation of the multipurpose display
   Removal and installation прикуривателя
   Removal and installation of hours
   Removal and installation of sound signals
   Removal and installation of the lever of a screen wiper
   Removal and installation of the motor of a screen wiper and draught
   Removal and installation of the motor of a screen wiper of back glass
   Removal and installation of components of system of a washer of wind glass / a back door
   Removal and radio tape recorder installation
   Removal and installation of loudspeakers
   Removal and radio antenna installation
   The anticreeping alarm system and иммобилизатор the engine
   Removal and installation of components of the electric drive/heating of a forward seat
   System of pillows of safety - the general information and safety measures
   Removal and installation of components of pillows of safety
+ Electric equipment schemes



Removal and installation of components of system of a washer of wind glass / a back door

The tank of a washer of wind glass / a back door

 REMOVAL AND INSTALLATION

1. Working in an impellent compartment, turn away a fixing nut/screw (where is available) and remove a jellied mouth of the tank of a washer.
2. Cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props. Remove the right forward wheel, then turn away screws of fastening and remove the loose leaf of an arch of a wheel.
3. Release fixing скобы and disconnect hoses from connecting муфты the washer pump (where is available). Where there are some hoses, note their installation.
4. Track electroconducting from the pump of a washer to a socket and disconnect it from the main plait.
5. Turn away a fixing nut on a forward part of the tank, then remove it.
6. Make installation upside-down.

The washer pump

 REMOVAL AND INSTALLATION

1. Remove the tank as it is described earlier in this Section.
2. Accurately extend the pump from the tank and remove a sealing ring. Смойте the spilt liquid cold water.
3. Make installation upside-down. At installation use a new sealing ring.

The switch of level of a liquid in the washer tank

 REMOVAL AND INSTALLATION

1. To get access to the level switch (where is available), cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props. Remove a forward wheel, then turn away screws of fastening and remove the loose leaf of an arch of a wheel.
2. Disconnect a socket of electroconducting from the switch of level and accurately remove it from the tank. Remove a sealing ring and смойте the spilt liquid cold water.
3. Make installation upside-down. At installation use a new sealing ring.

Nozzles of a washer of a windshield

 REMOVAL AND INSTALLATION

1. To get access to washer nozzles open a cowl, then accurately wring out a screw-driver fixing скобы and unbend шумопоглощающую a lining on a cowl cover. Disconnect hoses of a washer from a corresponding nozzle, then press fixing скобы and accurately remove a nozzle from a cowl.
2. At installation reliably connect a nozzle to a hose and press it into a cowl. Check up nozzle functioning.

Nozzle of a washer of a back door

 REMOVAL AND INSTALLATION

1. Open the back door opening upwards and separate a sealant from a doorway.
2. Press blocking uvulas and shift with fixing скоб a back part of a ceiling.
3. Wring out a cover screw-driver to hinges of a back door, then accurately unbend a ceiling.
4. Turn away a fixing nut, then remove a nozzle of a washer and consolidation from a roof, having disconnected a hose.
5. Make installation upside-down.