Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Body and bottom service
   Care of an upholstery and rugs
   Restoration of insignificant damages of a body
   Considerable damages of a body - restoration
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation of a rope of the lock of a cowl
   Removal and installation of the lock of a cowl
   Removal and door installation
   Removal and installation of the panel of furnish of doors
   Removal and installation of the handle of a door and lock components
   Removal and installation of glass of a door window and window lifterа
   Removal and installation of a cover of a luggage carrier
   Removal and installation of components of the lock of a cover of a luggage carrier
   Removal and installation of a door of a luggage compartment
   Removal and installation of components of the lock of a back door
   Removal and installation of components of system of the uniform lock
   Removal and installation of components electric window lifterа
   Removal and installation of external mirrors and the connected components
   The wind and back has flown down - the general information
   The top hatch - the general information
   Removal and installation of external elements кузовной furnish
   Removal and installation of seats
   System of a tension of seat belts of forward seats - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of assemblage of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of elements of internal furnish of salon

Panels of internal furnish

 REMOVAL

1. For fastening of panels of internal furnish of salon screws, and also various type clamps (usually tightening or шпилечного type) are used.
2. Make sure that the panel subject to removal is not blocked by any other element of furnish. Usually the order of dismantle of panels is quite obvious and is easily defined at external inspection of salon.
3. Release all visible fixture (such, as screws). If after отдавания fixture the panel does not give in to removal, hence there are still latent clamps. Clamps are usually located along edges of the panel and released automatically at them поддевании. It is necessary to remember that plastic clamps at dismantle of panels easily break and at assemblage should be replaced. For отпускания clamps at absence near at hand the special adaptation is better the screw-driver with a flat sting approaches. We will notice also that in many cases from the panel subject to dismantle it is necessary to separate a sealing strip of an adjoining doorway.
4. Do not try to remove at all the panel not giving in to dismantle by force application. Always before make sure that all fixture is released.
5. Installation is made upside-down. Track reliability of fixing of the panel all provided screws and clamps.

Cover of a ware box

 REMOVAL

1. Open a cover of a ware box and disconnect from it restrictive cables (address to an accompanying illustration).

2. Accurately delay a cover back and, having hooked a screw-driver, release clamps of fastening of its loops to the panel of devices (address to an accompanying illustration). Try not to lose clamps after cover removal.

3. At installation track reliability of fixing of loops and restrictive cables.

Carpet covering

 REMOVAL

1. The floor carpet covering of salon of the car is executed from an integral piece ковролина which edges are fixed by means of screws and clamps. The usually same fixture is used for fastening of elements of decorative furnish of salon interfaced to a carpet covering.
2. Removal of a carpet covering is carried out simply enough, however takes away a lot of time in view of necessity of preliminary dismantle of elements of furnish of salon interfaced to it, and also seats, the central console and bottom анкерных knots of seat belts.

Ceiling upholstery

 REMOVAL

1. The ceiling upholstery fastens to a roof of the car by means of clamps and can be dismantled only after removal of such elements, as top поручневые handles, sun-protection peaks, assemblage of the top hatch, a windscreen, back window leaves, and also panels of furnish of salon interfaced to it. Besides, it is necessary to liberate sealing strips from apertures of doors and the top hatch.
2. Dismantle of a ceiling upholstery demands from the executor of certain skills that is why it will be reasonable to charge performance of the given work to experts of car-care centre.