Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Body and bottom service
   Care of an upholstery and rugs
   Restoration of insignificant damages of a body
   Considerable damages of a body - restoration
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation of a rope of the lock of a cowl
   Removal and installation of the lock of a cowl
   Removal and door installation
   Removal and installation of the panel of furnish of doors
   Removal and installation of the handle of a door and lock components
   Removal and installation of glass of a door window and window lifterа
   Removal and installation of a cover of a luggage carrier
   Removal and installation of components of the lock of a cover of a luggage carrier
   Removal and installation of a door of a luggage compartment
   Removal and installation of components of the lock of a back door
   Removal and installation of components of system of the uniform lock
   Removal and installation of components electric window lifterа
   Removal and installation of external mirrors and the connected components
   The wind and back has flown down - the general information
   The top hatch - the general information
   Removal and installation of external elements кузовной furnish
   Removal and installation of seats
   System of a tension of seat belts of forward seats - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of assemblage of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of components of seat belts

On the models equipped with system of a tension of seat belts before to start to work familiarise with materials Has undressed Removal and installation of seats.

Seat belts of forward seats

MODELS THE SEDAN (SALOON) AND ХЭТЧБЭК (HATCHBACK)

 REMOVAL

1. Disconnect a negative wire from the battery.
2. For the purpose of maintenance of sufficient free space, remove a corresponding forward seat (see Has undressed Removal and installation of seats).

3. Having hooked a screw-driver with a flat sting, dismember internal and external sections of the button of the lever of adjustment of height of position of the top anchor of a seat belt by liberation of the button from clamps (address to an accompanying illustration).

4a. Release clamps.

4b. Then turn out a fixing bolt top анкерной support and separate a seat belt from a door pillar (address to illustrations).

5. Liberate from the central rack of a door forward and back sealing strips.

6. Release clamps of the decorative panel of furnish of the central rack (move from top to down). Remove the panel (address to an accompanying illustration).

7. Remove a decorative cover, then turn out a bolt of the bottom anchor of a seat belt (address to an accompanying illustration).

8. Accurately liberate a forward part of the panel of furnish of a threshold of a back door from clamps for the purpose of providing of access to the back fixing screw. In case of need lift a pillow of a back seat and turn out the fixing screw, having provided fuller branch of the panel (address to an accompanying illustration).

9a. Turn out the back fixing screw.

9b. Turn out the top fixing screw.

9c. Since a back part and moving forward, liberate from clamps and remove the finishing panel of a rack/threshold. Liberate a belt from the panel and remove last from the car (address to illustrations).

10. Turn out a bolt of fastening of an inertial drum of the returnable device and remove assemblage of a seat belt from the car.
11. In case of need the mechanism of adjustment of height of position of the top anchor can be removed after отдавания its fixing bolts.

COMPARTMENT MODELS (COUPE)

 REMOVAL

1. Remove a back seat (see Has undressed Removal and installation of seats) and shift forward against the stop the forward.

2a. Remove a decorative cover of the screw of fastening bottom анкерной скобы a seat belt. Turn out a bolt.

2b. Separate скобу from кузовной panels and liberate it from a seat belt loop (address to illustrations).

3. Turn out bottom анкерный a bolt of a seat belt of a back seat, then liberate a belt from the panel of decorative furnish of salon (address to an accompanying illustration).

4. Liberate a sealing strip from an aperture of a back door of the car.

5a. Turn out fixing screws.

5b. Bысвободите from clamps the bottom section of the panel of lateral furnish of a back seat also remove it from the car (address to an accompanying illustration).

6. Enter a screw-driver with a flat sting between internal and external sections of the button of the lever of adjustment of height of position of the top anchor of a seat belt (address to an accompanying illustration). Having dismembered sections, remove the button.

7. Remove a decorative cover, then turn out a fixing bolt and disconnect a seat belt from top анкерной support (address to an accompanying illustration).

8. Moving from top to down, release clamps of fastening of the panel of decorative furnish of a rack and remove the panel (address to an accompanying illustration).

9. Remove decorative furnish of a back rack (see more low).

10. Turn out a lock finger of fixing of a back of a back seat from a lateral wall of salon of the car (address to an accompanying illustration).

11. Open back lateral glass, then turn out the screw of fastening of an executive rod to the electromotor of a drive of opening of glass (address to an accompanying illustration). Cautiously liberate a rod of draught from a spindle.

12a. Turn out fixing screws

12b. Release clamps and remove the panel of lateral furnish of salon, passing through it a tape of a seat belt of a forward seat (address to illustrations).

13. Give nuts of fastening of an inertial drum of the returnable device and remove a seat belt from the car (address to an accompanying illustration).

Seat belts of back seats

MODELS ХЭТЧБЭК (HATCHBACK)

 REMOVAL

1. Remove a luggage space shelf.

2a. Combine back seats and disconnect electroconducting from a back loudspeaker from outside a belt subject to removal. Turn out screws of fastening of a corresponding arm of a back shelf.

2b. Remove an arm (address to illustrations).

3a. Liberate a sealing strip of an aperture of a back door from the panel of lateral furnish of fixing of a back seat. Turn out a lock finger of a back of a back seat.

3b. Cнимите the finishing panel (address to illustrations).

4. Turn out bottom анкерный a seat belt bolt (address to an accompanying illustration).

5a. Release clamps and remove the top panel of furnish of a back shelf, passing through it a seat belt tape.

5b. At removal of the panel from the left rack it is necessary to disconnect electroconducting from a lantern of illumination of a luggage space (address to illustrations) also.

6. Turn out a bolt of fastening of an inertial drum of the returnable device and remove a back seat belt (address to an accompanying illustration).

COMPARTMENT MODELS (COUPE)

 REMOVAL

1. Remove a pillow of a back seat (see Has undressed Removal and installation of seats) and combine forward its back.
2. Turn out bottom анкерный a bolt and liberate a tape of a belt from the panel of lateral furnish of salon.
3. Remove the panel of the top furnish of a forward rack (paragraphs above see), Separate a sealing strip of a doorway from panel edge.

4. Cautiously liberate from the panel of furnish of a back rack and disunite a socket of electroconducting of heating of back glass (address to an accompanying illustration).

In order to avoid breakage токопроводной veins try not to bend a wire excessively!

5a. Turn out the fixing screw, then release clamps and panels of furnish of a back rack (address to illustrations).

5b. Remove the panel, passing through it a belt tape.

6. Turn out a bolt of fastening of an inertial drum of the returnable device and remove a seat belt from the car.

MODELS THE SEDAN (SALOON)

 REMOVAL

1. Remove a top level projector (the Onboard electric equipment see the Head). On the models equipped with back loudspeakers, remove from a back shelf decorative lattices of the last.
2. Release clamps and remove pillows of a back seat, then (necessarily) turn out bottom анкерный a seat belt bolt.

3. Liberate a decorative cover of a corresponding seat belt from the finishing panel of a back shelf (address to an accompanying illustration).

4a. Combine forward backs of a back seat, then cautiously take clamps of fastening of a first line of the panel of furnish of a back shelf.

4b. Cautiously having pulled forward, separate the panel from a shelf (address to illustrations).

5. Give a bolt of fastening of an inertial drum of the returnable device and remove a seat belt from the car, passing its tape through a groove in the panel of furnish of a back shelf.


 INSTALLATION

1. Installation is made upside-down. Track correctness of fastening of assemblages of inertial drums of returnable devices on кузовных car panels, and also behind reliability of a tightening of fixture. Estimate reliability of fastening by the screws and clamps of panels and covers of decorative furnish of salon.