Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Body and bottom service
   Care of an upholstery and rugs
   Restoration of insignificant damages of a body
   Considerable damages of a body - restoration
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation of a rope of the lock of a cowl
   Removal and installation of the lock of a cowl
   Removal and door installation
   Removal and installation of the panel of furnish of doors
   Removal and installation of the handle of a door and lock components
   Removal and installation of glass of a door window and window lifterа
   Removal and installation of a cover of a luggage carrier
   Removal and installation of components of the lock of a cover of a luggage carrier
   Removal and installation of a door of a luggage compartment
   Removal and installation of components of the lock of a back door
   Removal and installation of components of system of the uniform lock
   Removal and installation of components electric window lifterа
   Removal and installation of external mirrors and the connected components
   The wind and back has flown down - the general information
   The top hatch - the general information
   Removal and installation of external elements кузовной furnish
   Removal and installation of seats
   System of a tension of seat belts of forward seats - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of assemblage of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of the handle of a door and lock components

THE INTERNAL HANDLE OF THE DOOR-LOCK

 REMOVAL

1. Turn away the fastening screw, крепящий the handle to a door, then separate assemblage of the handle from draught and remove it from the car (address to an accompanying illustration).

THE EXTERNAL HANDLE OF THE LOCK OF THE FORWARD DOOR

 REMOVAL

1. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.

2a. Remove ударогасящую the panel from a door.

2b. On models of the Compartment and Scenic the panel fastens screws, and on all the others - скобами - address to illustrations).

3a. Turn away fixing nuts.

4b. Remove the external handle from a door.

THE CYLINDER OF THE LOCK OF THE FORWARD DOOR

 REMOVAL

1. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.
2. Remove ударогасящую the panel from a door. On models of the Compartment and Scenic the panel fastens screws, and on all the others - скобами.

3a. Turn away fastening screws (the Hatch-back and the Sedan).

3b. Remove an anticreeping overlay (the Hatch-back and the Sedan) from lock assemblage (address to illustrations).

3c. Turn away screws fastenings (Compartment).

3d. Remove an anticreeping arm (Compartment) from lock assemblage (address to illustrations).

4a. Release fixing скобу, having turned it on 90 .

4b. Then remove the cylinder of the lock and скобу from a door (address to illustrations).

ASSEMBLAGE OF THE LOCK OF THE FORWARD DOOR

 REMOVAL

1. Remove the lock cylinder as it is described earlier in this Section.

2. Separate draught of assemblage of the lock from the external handle, then release draught of the internal handle from directing on a door (address to an accompanying illustration).

3a. Turn away screws of fastening of the lock.

3b. Remove assemblage of the lock from a door, having disconnected a socket of electroconducting from the activator of the uniform lock (where is available) (address to illustrations).

THE EXTERNAL HANDLE OF THE BACK DOOR

 REMOVAL

1. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.

2. Wring out a screw-driver rubber covers from a door to get access to fixing nuts (address to an accompanying illustration).

3. Separate draught from the handle, then turn away fixing nuts with remove the handle from a door.

ASSEMBLAGE OF THE LOCK OF THE BACK DOOR

 REMOVAL

1. Remove the external handle as it is described above.

2. Disconnect the internal button of the lock from a door, then release draught from the button and remove assemblage from a door (address to an accompanying illustration).

3. Remove glass of a back door as Removal and installation of glass of a door window and window lifterа is described in Section.

4. Release draught of the internal handle from directing and separate скобы a rope/draught from a door (address to an accompanying illustration).

5a. Turn away fastening screws.

5b. Cнимите assemblage of the lock from a door, having disconnected an electroconducting socket (it is shown by an arrow) from the activator of the uniform lock (where is available) (address to illustrations).


 INSTALLATION

1. Make installation upside-down. Before installation of the panel of furnish, check up functioning of the lock and handles.