Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assemblage of a forward rotary fist
   Check and replacement of bearings of a nave of a forward wheel
   Removal and installation of a forward rack
   Partition of a forward rack
   Removal and installation of the forward stabilizer of cross-section stability
   Removal, partition and installation of the bottom lever of a forward suspension bracket
   Removal and installation of the spherical hinge of the bottom lever of a forward suspension bracket
   Check and replacement of bearings of a nave of a back wheel
   Removal, check and installation of the back shock-absorber
   Removal and installation of the back stabilizer of cross-section stability (back axis of the closed type)
   Removal and installation of a back axis
   The general description of a partition of a back axis
   Check and adjustment of a road gleam of the car
   Removal and steering wheel installation
   Removal, survey and installation of a steering column
   Removal, survey and installation of the steering mechanism
   Removal and installation of the pump of the steering hydraulic booster
   Prorolling of hydrosystem of the steering hydraulic booster
   Replacement of a protective cover of the steering mechanism
   Removal and installation of a tip of steering draught
   Removal and installation of cross-section steering draught
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of a forward rack

 REMOVAL

1. Block back wheels, cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props. Remove a wheel.

2. Turn away a bolt of fastening and separate a conducting arm / a brake hose from the rack basis (address to an accompanying illustration).

3. Remove from bolts, крепящих a rotary fist to a rack of a suspension bracket, a nut and a washer, having remembered that nuts are placed on the back party of a rack. Take bolts and prop up assemblage of a rotary fist (address to an accompanying illustration).

4. Working in an impellent compartment, mark apertures into which bolts of the top fastening of a rack are inserted, then ask the assistant to support weight of a rack and turn away both bolts (address to an accompanying illustration). On models Scenic fixing bolts of a rack are located under box panels воздухопритока. To get access, remove both levers of a screen wiper (the Head the Onboard electric equipment) and partition consolidation. Turn away screws and remove box panels воздухопритока, displacing them to the windscreen centre. Remove sealing covers of a turret of a rack and turn away bolts as it is described above.

5. Separate a rack from a rotary fist and take it from under a wheel arch, trying not to damage a protective cover of a power shaft (address to an accompanying illustration).


 INSTALLATION

1. Deduce rack assemblage into position, trying not to damage a protective cover of a power shaft. Place a plate of the top fastening so that to combine its marked apertures under bolts with apertures of an adjoining component, then establish bolts and tighten their effort resulted in Specifications. Back apertures are used on cars with the steering hydraulic booster, and forward apertures - on models without it; turn an assembly plate as required (address to an accompanying illustration).

2. Insert bolts of fastening of a rotary fist into a rack (in front of the car). Establish washers and nuts and tighten their effort resulted in Specifications.
3. Establish on a rack an arm of a brake hose/electroconducting and reliably tighten a fastening bolt.
4. On models Scenic put not sealing covers of a turret of a rack a hermetic strip. Establish box panels воздухопритока, consolidation of a partition and screen wiper levers.