Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assemblage of a forward rotary fist
   Check and replacement of bearings of a nave of a forward wheel
   Removal and installation of a forward rack
   Partition of a forward rack
   Removal and installation of the forward stabilizer of cross-section stability
   Removal, partition and installation of the bottom lever of a forward suspension bracket
   Removal and installation of the spherical hinge of the bottom lever of a forward suspension bracket
   Check and replacement of bearings of a nave of a back wheel
   Removal, check and installation of the back shock-absorber
   Removal and installation of the back stabilizer of cross-section stability (back axis of the closed type)
   Removal and installation of a back axis
   The general description of a partition of a back axis
   Check and adjustment of a road gleam of the car
   Removal and steering wheel installation
   Removal, survey and installation of a steering column
   Removal, survey and installation of the steering mechanism
   Removal and installation of the pump of the steering hydraulic booster
   Prorolling of hydrosystem of the steering hydraulic booster
   Replacement of a protective cover of the steering mechanism
   Removal and installation of a tip of steering draught
   Removal and installation of cross-section steering draught
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ Electric equipment schemes



Replacement of a protective cover of the steering mechanism

 REPLACEMENT

1. Remove шаровый the hinge of a tip of cross-section draught as Removal and installation of a tip of steering draught is described in Section.
2. Mark an arrangement of a protective cover on cross-section steering draught. Let out collars and separate a protective cover from картера the steering mechanism and a tip of steering draught.
3. Carefully clear steering draught and картер the steering mechanism, using fine-grained наждачную a skin. Remove corrosion, agnails and roughnesses which could damage sealing edges of a new protective cover at installation.
4. Remove greasing from an old protective cover. If it is not polluted by sand, put it on internal шаровый the hinge of steering draught. Otherwise, put fresh молибденовую greasing.
5. Grease an internal part of a new protective cover. Accurately place a protective cover on cross-section steering draught and establish it on картер the steering mechanism. Level external edge of a protective cover with a label made on steering draught before removal, then attach its new collars.
6. Establish шаровый the hinge of steering draught as Removal and installation of a tip of steering draught is described in Section.