Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   Removal and installation of assemblage of a forward rotary fist
   Check and replacement of bearings of a nave of a forward wheel
   Removal and installation of a forward rack
   Partition of a forward rack
   Removal and installation of the forward stabilizer of cross-section stability
   Removal, partition and installation of the bottom lever of a forward suspension bracket
   Removal and installation of the spherical hinge of the bottom lever of a forward suspension bracket
   Check and replacement of bearings of a nave of a back wheel
   Removal, check and installation of the back shock-absorber
   Removal and installation of the back stabilizer of cross-section stability (back axis of the closed type)
   Removal and installation of a back axis
   The general description of a partition of a back axis
   Check and adjustment of a road gleam of the car
   Removal and steering wheel installation
   Removal, survey and installation of a steering column
   Removal, survey and installation of the steering mechanism
   Removal and installation of the pump of the steering hydraulic booster
   Prorolling of hydrosystem of the steering hydraulic booster
   Replacement of a protective cover of the steering mechanism
   Removal and installation of a tip of steering draught
   Removal and installation of cross-section steering draught
   Corners of installation of wheels
+ Body
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of the back stabilizer of cross-section stability (back axis of the closed type)

 REMOVAL

1. Block forward wheels and choose a backing (or position “Р”). Поддомкратьте a back part of the car also establish it on axial props.

2. Remove bolts, fastening the stabilizer ends to longitudinal levers of a back suspension bracket (address to an accompanying illustration). Remove from longitudinal levers распорные plates of fixing nuts of the stabilizer.

3. Take the stabilizer of cross-section stability from under the car.


 INSTALLATION

1. Establish the stabilizer, remembering that its arms should be turned the figured edge to a forward part of the car (address to an accompanying illustration).

2. Place распорные plates of fixing nuts on longitudinal levers of a suspension bracket. Establish fastening bolts, having placed fixing скобы a rope of a manual brake on a former place. Tighten bolts of fastening of the stabilizer the effort resulted in Specifications.
3. Lower the car on the earth.