Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   Prorolling of hydrosystem of brakes
   Replacement of brake tubes and hoses
   Replacement колодок forward brake mechanisms
   Replacement колодок back brake mechanisms
   Survey, removal and installation of a disk of the forward brake mechanism
   Removal, survey and installation of drums of back brake mechanisms
   Removal, partition and installation of supports of forward brake mechanisms
   Removal and installation of the cylinder of the back brake mechanism
   Removal, partition and installation of the main cylinder
   Removal and installation of a pedal of a brake
   Check, removal and installation of the block of the vacuum amplifier
   Removal, check and installation of the unilateral valve of the block of the vacuum amplifier
   Adjustment of a manual brake
   Removal and installation of the lever of a manual brake
   Removal and installation of ropes of a manual brake
   Check, removal and installation of the valve of adjustment of pressure in back brake mechanisms
   Removal, installation and adjustment of the switch of lanterns
   The general description of system of antiblocking of brakes (ABS)
   Removal and installation of components of system ABS
   Removal and installation of the vacuum pump (diesel engines)
   Check of serviceability and partition of the vacuum pump (diesel engines)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes



Removal, check and installation of the unilateral valve of the block of the vacuum amplifier

 REMOVAL

1. Disconnect a hose from the unidirectional valve of the amplifier established on a forward part of the block.
2. Take the valve from a rubber sealing ring, using a rotary motion. Remove from the amplifier a sealing ring.


SERVICEABILITY CHECK

1. Examine the valve on presence of damages and replace it if it is necessary. Direct through the valve a current of air. The serviceable valve passes air only in one direction - from the amplifier to the pipeline. Replace the valve, if it not so.
2. Examine a rubber sealing ring and a flexible vacuum hose on presence of damages and replace them as required.


 INSTALLATION

1. Establish a sealing ring and the amplifier.
2. Establish the unidirectional valve into position, trying not to displace and not to damage a sealing ring, then connect a vacuum hose.
3. In summary, start the engine and check up the amplifier on presence of leaks of air.