Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   Prorolling of hydrosystem of brakes
   Replacement of brake tubes and hoses
   Replacement колодок forward brake mechanisms
   Replacement колодок back brake mechanisms
   Survey, removal and installation of a disk of the forward brake mechanism
   Removal, survey and installation of drums of back brake mechanisms
   Removal, partition and installation of supports of forward brake mechanisms
   Removal and installation of the cylinder of the back brake mechanism
   Removal, partition and installation of the main cylinder
   Removal and installation of a pedal of a brake
   Check, removal and installation of the block of the vacuum amplifier
   Removal, check and installation of the unilateral valve of the block of the vacuum amplifier
   Adjustment of a manual brake
   Removal and installation of the lever of a manual brake
   Removal and installation of ropes of a manual brake
   Check, removal and installation of the valve of adjustment of pressure in back brake mechanisms
   Removal, installation and adjustment of the switch of lanterns
   The general description of system of antiblocking of brakes (ABS)
   Removal and installation of components of system ABS
   Removal and installation of the vacuum pump (diesel engines)
   Check of serviceability and partition of the vacuum pump (diesel engines)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of a pedal of a brake

MODELS WITH РКПП

 REMOVAL

1. Remove a coupling pedal as Coupling is described in the Head.

2. Pull out fixing скобу and remove a pin of a plug of a pusher, крепящий a bar-pusher of the block of the vacuum amplifier to a pedal (address to an illustration).

3. Put forward a rotary axis of a pedal from working position and deduce a pedal of a brake from under the instrument panel together with assembly plugs and распорной a lining.
4. Examine a pedal on presence of damages and deterioration signs, giving particular attention шарнирным to plugs, and replace the worn out components.

MODELS WITH AUTOMATIC TRANSMISSION

 REMOVAL

1. Working in salon, remove the bottom cover of the instrument panel (where is available) to get access to assemblage of a pedal of coupling. Turn away a nut of a rotary axis of a pedal, then remove a pedal as it is described in paragraphs 2-4 above.

MODELS WITH РКПП

 INSTALLATION

1. Put on working surfaces of a pedal, распорной a lining and plugs a quantity of universal greasing. Insert распорную a lining into a pedal and establish plugs flanges more close to external edge. Put also greasing on a plug of a pusher of the amplifier and its pin.
2. Deduce pedal assemblage into position under the panel, having connected it to an amplifier pusher, then push a pedal axis into place.
3. Level a pedal with a bar-pusher and insert a pin of a plug of a pusher. Attach a pin скобой.
4. Check up action of a pedal of a brake, then establish a coupling pedal as Coupling is described in the Head.

MODELS WITH AUTOMATIC TRANSMISSION

 INSTALLATION

1. Establish a pedal as it is described above, then reliably tighten a nut of a rotary axis. Check up action of a pedal of a brake, having made on the car a short trip.